We earn a commission if you buy through our links, at no extra cost to you.

Product profile

XGIMI Horizon S Pro: Specs, Pros & Cons

XGIMI Horizon S Pro explained: 1,800 ISO lumens, Dual Light 2.0, Dolby Vision, 1.2:1 throw, flexible stand, Harman Kardon sound, gaming lag and who should skip it.

By the Best Projectors editorial team Published
XGIMI Horizon S Pro

XGIMI Horizon S Pro

A compact, polished 4K projector that works in almost any room, thanks to its tilting stand and strong auto setup. A good fit for movie nights, not for bright daytime rooms.

What we like

  • 4K DLP with Dolby Vision, HDR10 and HLG, and 1,800 ISO lumens per XGIMI
  • Flexible built-in stand tilts up for ceiling projection, with auto focus and auto keystone
  • Two 12 W Harman Kardon speakers and Android TV 11 with 32 GB of storage

Drawbacks

  • Only one HDMI input, so a soundbar plus a console means swapping or adding a switch
  • A 1.2:1 throw ratio needs roughly 8 to 9 feet for a 100-inch image
  • Wi-Fi 5 and a 12-month warranty on XGIMI's US page

The XGIMI Horizon S Pro sits in the sweet spot for people who want a serious 4K picture from a projector that does not look like a piece of AV gear. It is a compact, rounded box with a flexible built-in stand, two 12 W Harman Kardon speakers and Android TV built in. It works on a shelf, on a coffee table or aimed at the ceiling, and its auto setup handles most of the fiddly work.

This profile draws on the maker’s published specifications; where a figure is missing, we say so. XGIMI notes that its performance data are laboratory values, so treat them as the maker’s figures.

Who the Horizon S Pro Is For

This is a good fit for movie lovers in apartments and small houses who want a big picture without installing anything. It suits renters, since it needs no drilling, and it works well in bedrooms and dens, where the tilting stand lets you project on a wall or the ceiling. It is also a good choice if you want a single box that handles streaming, sound and setup.

It is less suited to someone with a bright room all day, or someone who wants a battery for outdoor use. It runs on AC power, with no battery listed.

Brightness, Explained Honestly

XGIMI lists 1,800 ISO lumens. ISO lumens measure white light output according to the ISO 21118 standard, and XGIMI’s footnote says the nominal value is an average of mass-produced units measured under ideal laboratory conditions in Performance Mode, which also gives the highest brightness. In that mode the colors may look different from the default viewing mode and the fan may get louder. The brightness you get in everyday viewing modes is therefore lower than the headline figure.

Do not compare 1,800 ISO lumens directly with an ANSI number from another brand, or with Epson’s color brightness, as if they were the same measurement. They are different procedures. The practical advice is simple: this projector is bright enough for a dim living room and excellent in a dark one, but it will not fight afternoon sun.

Light Source and Color

XGIMI calls its light source Dual Light 2.0 and describes it as its solution for higher brightness and more accurate color. The projector uses a 0.47-inch DMD DLP chip. XGIMI lists a color gamut of 110 percent of BT.2020, a figure it says comes from its own laboratory, plus HDR10, HLG and Dolby Vision. The page also lists SGS certifications for low blue light, low speckle and low color breakup, and a dynamic contrast ratio of 1,000,000:1, which XGIMI notes is a dynamic figure, not a native one.

The theoretical light source lifespan is listed as 20,000 hours, with a note that actual life varies with environment, usage and mode. At four hours a night that works out to well over a decade, but treat that as the maker’s expectation. Unlike a traditional lamp projector, there is no lamp to swap on a schedule.

Resolution

The spec table lists a standard resolution of 3840 x 2160 pixels. It also lists a motion-smoothing feature (MEMC) and 3D support in frame packing and side-by-side formats. For most people the key point is that it gives you a sharp 4K image from a small box.

Placement and Throw Distance

XGIMI lists a throw ratio of 1.2:1 and an image size of 40 to 200 inches, and also recommends 60 to 150 inches for the best viewing experience. With a 1.2:1 ratio, a 100-inch 16:9 image is about 87 inches wide, which puts the projector around 105 inches, or 8.7 feet, from the screen. That is our own calculation from the stated ratio. For a 120-inch image you would need about 10.5 feet.

That has consequences. In a small bedroom, a 100-inch picture may need the projector near the foot of the bed or on a shelf behind you. In a typical family room, 8 to 9 feet back is easy. If you only have 4 or 5 feet to work with, look at the short-throw BenQ TK705STi instead.

The flexible stand and the front-ceiling and rear-ceiling modes are the nicest part. XGIMI describes the built-in stand as removing the need for extra brackets or mounts, even when projecting onto a ceiling. Combine that with ISA 5.0, XGIMI’s Intelligent Screen Adaption, which includes auto focus, auto keystone, obstacle avoidance, screen alignment and wall color adaption, and setup takes minutes.

XGIMI adds caveats worth reading: for accurate calibration the side throw angle should not exceed 40 degrees, obstacle avoidance does not guarantee it will avoid every obstacle, and the uninterrupted auto keystone may require manual correction in some rooms.

Smart Features

XGIMI lists Android TV 11.0 on a Cortex-A55 processor with 2 GB of RAM and 32 GB of storage. Mirroring is through DLNA and Google Cast, and there is a fast-boot mode. Connectivity is Wi-Fi 5 dual band and Bluetooth 5.1. Android TV 11 is not the newest version, so check that your streaming apps are available. The package includes a Bluetooth remote.

Sound

Two 12 W Harman Kardon speakers are listed, along with DTS Virtual:X, DTS-HD, Dolby Audio, Dolby Digital and Dolby Digital Plus. XGIMI states that the speaker data come from its acoustic laboratory. Twelve watts per side is generous for a compact projector, and it makes the Horizon S Pro one of the better-sounding small projectors on its own. It will still not give you the low end of a soundbar with a subwoofer. You can use the HDMI eARC port to feed one.

Gaming

XGIMI lists game-mode latency of 20 ms or less with AK off. That is a respectable figure for casual and most console gaming. XGIMI’s page makes no 120 Hz claim. The more significant limitation is the port count: one HDMI input with eARC support and two USB ports. If you connect a console, you will need to use the HDMI port for it, so a soundbar would have to connect over Bluetooth, or you can add an HDMI switch.

Noise and Ownership

The noise-level entry in XGIMI’s table was not readable in the text available to us, so we have no decibel figure. XGIMI’s footnote on brightness says that the fan may get louder in Performance Mode and recommends other modes for regular viewing. Keep the vents clear and do not drop it on a soft bed.

Physical details from the page: 9.2 x 10.7 x 6.9 inches (234 x 273 x 174 mm) and about 10.5 pounds (4.75 kg), though XGIMI notes actual size and weight may vary. XGIMI’s US page lists a 12-month hassle-free warranty. That is shorter than some competitors, so check the warranty terms before buying.

Who Should Skip It

  • Anyone who needs a very short throw distance or has little room behind the seating. A short-throw model suits you better.
  • Buyers who want several HDMI inputs without an extra switch.
  • People who will watch in a bright room every day. An ultra short-throw laser with an ambient-light-rejecting screen, like the Hisense PX3-PRO, is a better match.
  • Those who want a battery for camping.

Alternatives Among Our Picks

For a premium gimbal-based alternative that can aim anywhere without a stand, look at the Hisense C2 Ultra. For a short-throw 4K with HDMI 2.1 and a 5 ms input lag figure, the BenQ TK705STi is the more specialized option.

Final Take

The XGIMI Horizon S Pro is a smart, compact 4K projector with Dolby Vision, strong sound and one of the easiest setups around. It asks you for a dim room, an appropriate distance from the wall and a bit of planning around its single HDMI port. If those fit your home, it is a very satisfying way to watch movies.

See price on Amazon

To see how it stacks up against the other nine models, read our ranking of the best projectors of 2026.

Sources

Frequently asked questions

How far back does the XGIMI Horizon S Pro need to sit?

XGIMI lists a 1.2:1 throw ratio. That means the projector sits about 1.2 times the image width from the screen. A 100-inch 16:9 image is roughly 87 inches wide, so you need around 105 inches, or about 8.7 feet. This is our own arithmetic from XGIMI's stated ratio, and real distances depend on the zoom setting, so check XGIMI's projection planner before mounting anything.

Is it a laser projector?

XGIMI calls the light source Dual Light 2.0 and its page does not break down the components, so we will not call it a pure laser model. XGIMI lists a theoretical lifespan of 20,000 hours and says the actual life varies with usage and the mode selected.

Does it support Dolby Vision?

Yes. XGIMI lists Dolby Vision, HDR10 and HLG, and says the projector is Dolby Vision certified. Remember that a projector cannot reach the peak brightness of a TV, so HDR here means better tone mapping in a dim room.

Is it good for gaming?

XGIMI lists game mode latency of 20 ms or less with AK off. That is fine for most console and PC gaming. The spec table shows one HDMI port with eARC, which you may need to share between a console and a soundbar.

Can I project onto the ceiling?

Yes. XGIMI lists front ceiling and rear ceiling projection modes and describes a flexible built-in stand that lets you adjust the angle, including toward a ceiling. That makes it a good bedroom projector as long as the room is dark.

How loud is the fan?

XGIMI's page has a noise-level entry, but the figure was not in the text we could read, so we will not quote one. XGIMI says that in Performance Mode, which gives the highest brightness, the fan speed may increase and cause noise, and it recommends other brightness modes for regular viewing.