We earn a commission if you buy through our links, at no extra cost to you.
Best Projector for an Android Phone: Cast or Cable
How to put an Android phone on a projector: Google Cast over Wi-Fi, USB-C to HDMI, why Bluetooth is audio only, Netflix limits, and which models fit.
At a glance
Cast from Android over Wi-Fi to a Google TV projector: the Dangbei Atom is a slim, bright 1080p laser for a shelf, and the XGIMI MoGo 3 Pro is a small projector with a power bank option. The Nebula Capsule 3 adds a battery. Bluetooth carries audio, not video.


If you are shopping for a projector to use with an Android phone, you probably have a picture in your head: tap a button, and what is on your phone fills the wall. That works, but only if the projector supports the right kind of casting and you understand what each connection actually does. Many shoppers are confused by listings that say “Bluetooth projector.” This guide clears that up, explains the Wi-Fi and cable routes, and then matches site models to the setup.
This guide draws on the makers’ published specifications and on Google’s, Netflix’s and Samsung’s help pages; where a figure is missing, we say so.
The Short Answer
- Wi-Fi casting (Google Cast or Chromecast built in) is the easiest route for Android. Your phone sends a video stream or a screen to a projector that runs Google TV or Android TV.
- A cable (USB-C to HDMI) works for some phones and gives you a screen mirror with no network at all.
- Bluetooth is for audio. It does not carry video.
Bluetooth Is Not How Your Phone Shows Video
Listings often say “Bluetooth projector,” and people take that to mean the phone pairs and the picture appears. It does not. Nebula’s support pages say Chromecast uses a Wi-Fi connection, not Bluetooth. On the projectors in this guide, Bluetooth pairs headphones, a soundbar or a speaker, and Dangbei lists Bluetooth 5.1 for the Atom. Nebula’s pages describe the built-in speaker switching off when a Bluetooth headphone or speaker connects.
So treat Bluetooth as a nice extra for sound, and look for Chromecast, Google Cast or a screen mirroring feature when you need your phone’s picture.
Casting With Google TV: What Google Says
Google’s Google TV help page lays out the basics. Your phone and the Google TV device must be on the same Wi-Fi network. Then:
- Connect the phone to the same Wi-Fi network as the Google TV device.
- Open the app with the content you want to watch.
- Tap the Cast icon in the app.
- Choose the projector’s name from the list.
- Confirm that the Cast icon changes color.
Google adds a few conditions. You can only cast with the latest version of a Chromecast-enabled app or a Chrome browser. If casting does not appear, the Google Cast app on the device may need to be enabled, found in the TV’s Apps settings. And if the phone does not see the device, check that the two use the same Wi-Fi network, since a phone that has moved to another network will not find it. Updating the software from the System settings is the last step Google suggests.
Casting is different from mirroring. When you cast from an app such as YouTube, the projector fetches the video itself and your phone becomes a remote, so the phone can sleep or you can use other apps. Mirroring copies your phone’s screen, so everything on it shows, including notifications.
Netflix and Other Protected Apps
This is where many people get stuck. Netflix’s help center says casting only works on cast-compatible TVs and displays, and lists a short set of devices: Chromecast (3rd generation or older), Google Nest Hub smart displays, and select Vizio and Compal TVs. It also says casting or mirroring is available on Standard or Premium plans. For Android, the page says mirroring depends on the device and app, and mentions that Samsung phones may use Samsung DeX or Smart View.
The projector makers say something simpler. Nebula’s pages say Netflix and similar services cannot be mirrored or cast, and Dangbei says apps with copy protection usually refuse to mirror from a phone. XGIMI’s MoGo 3 Pro page, as our profile summarizes it, says the same about copy-protected apps. The reliable approach on all of them is to use the app on the projector itself: Google TV projectors with licensed Netflix let you sign in once and use the projector’s remote. If you stream a lot, that matters more than the cast feature. YouTube, Google Photos and many other apps are happy to cast.
The Wired Route: USB-C to HDMI
A cable avoids the network question entirely. Netflix’s help page says USB-C iPhones, iPads and Android devices can use a video cable or adapter, depending on the TV’s port, and notes that autoplay of the next episode is not supported over a cable or adapter. Samsung’s support page says a standard USB-C to HDMI adapter can start Samsung DeX, and that with some devices the TV or monitor automatically mirrors the phone. Samsung lists the Galaxy S, Note, Fold, Z Flip and tablet models that work, and says some Z Flip models and some FE tablets do not support HDMI output. Check your model’s manual or the maker’s page.
Two things to check on the projector side:
- The HDMI input. The Dangbei Atom lists HDMI with ARC, the Nebula Capsule 3 lists an HDMI 2.1 input with ARC, and the XGIMI MoGo 3 Pro has a micro HDMI port with ARC, so you may need a micro HDMI cable or adapter. XGIMI notes that HDR10 is not supported when micro HDMI is connected.
- The USB-C port is often for power. On the Capsule 3, Nebula’s support page says the USB-C port is for charging only. You need an adapter from your phone’s USB-C to the projector’s HDMI port, not a cable into the projector’s USB-C port.
Same Network: Hotels, Dorms and Hotspots
Casting needs the phone and the projector on one network. At home that is easy. In a hotel or dorm, shared networks often keep devices apart or need a login page the projector cannot show. Nebula’s support page says a phone’s hotspot can be the shared network, and it is a fallback when the Wi-Fi is not working. So in a hotel the usual solution is to turn on your phone’s hotspot, join the projector to it, and then cast. A small travel router does the same job with no data use. Nebula recommends keeping the projector within about 16 feet of the router for a good signal.
What to Look for in the Spec Sheet
- Google TV or Android TV and the words Chromecast built in or Google Cast. These are the ones that cast from Android with no extra hardware. Dangbei lists Chromecast built in for the Atom, and XGIMI lists Google Cast and DLNA for the MoGo 3 Pro and Horizon S Pro.
- Licensed Netflix on the projector, since you will likely use the app on the device.
- An HDMI input for the cable route and for a streaming stick.
- Brightness and darkness. Casting does not change the physics: most of these projectors want a dim room.
- Be careful with other operating systems. The Hisense C2 Ultra runs VIDAA according to Hisense, not Google TV. Hisense’s pages do not describe Google Cast, so we do not recommend it for casting from Android. It is a fine projector, just not this guide’s pick. See our Hisense C2 Ultra profile.
Which Models Fit an Android Phone
For the whole lineup, see our 10-model projector comparison.
Dangbei Atom: The Shelf Laser

A slim 1080p laser projector with Google TV, Chromecast built in and Bluetooth audio. A fit for casting from Android in a bedroom or small apartment.
Dangbei lists Google TV, officially licensed Netflix, Chromecast built in and 1,200 ISO lumens. It is 1.87 inches thick, plugs into a 120 W adapter and has no battery. It is the brightest of the 1080p picks and the most practical for a fixed spot. Dangbei’s store page showed an out-of-stock label when our profile was written, so check the live listing. Our Dangbei Atom profile has the details.
XGIMI MoGo 3 Pro: Small, With Cast and a Power Bank

A mini 1080p projector with Google TV, Google Cast and licensed Netflix, powered from a USB-C bank. A fit for casting from Android in a dorm or on a trip.
XGIMI lists Google TV, licensed Netflix and mirroring through DLNA and Google Cast. It also lists a micro HDMI port with ARC. It has 450 ISO lumens, so it needs a dark room, and a stand that tilts up. It has no built-in battery but runs from a USB-C 65 W power bank. Read the XGIMI MoGo 3 Pro profile.
Nebula Capsule 3: The Battery Option

A soda-can-size 1080p projector with Google TV, Chromecast over Wi-Fi and a battery. A fit for casting from Android in a dark room, tent or hotel.
Nebula’s support pages say the Capsule 3 supports Chromecast over Wi-Fi, comes with Netflix installed and plays video files from FAT32 or NTFS USB drives up to 4 TB. It has a battery of about 2.5 hours in Eco Mode, which is shorter than many films. Its brightness is the lowest of the picks, so it is a dark-room device. Our Nebula Capsule 3 profile covers the limits.
XGIMI Horizon S Pro: When You Want 4K

A compact 4K projector with Android TV, Google Cast and Dolby Vision. A fit when you want a bigger step up in picture and sound.
XGIMI lists Android TV 11.0 and mirroring through DLNA and Google Cast. Android TV 11 is not the newest version, so check that your apps are supported. It has one HDMI input with eARC, AC power only and 1,800 ISO lumens. See the XGIMI Horizon S Pro profile.
A Quick Setup Checklist
- Put the projector and phone on the same Wi-Fi network, or use your phone’s hotspot.
- Update the casting app and the Google TV software.
- Open the app on your phone, tap Cast and pick the projector.
- Use the projector’s own Netflix app instead of casting Netflix.
- For a cable, buy a USB-C to HDMI adapter and check your phone’s manual for video output.
- Use Bluetooth only for headphones or a speaker.
Sources
Frequently asked questions
Can I connect my Android phone to a projector with Bluetooth?
Not for video. Nebula's support pages say Chromecast uses a Wi-Fi connection, not Bluetooth. Bluetooth on these projectors is for audio, such as pairing headphones or a speaker, so a listing that says Bluetooth projector does not mean your phone's screen travels over Bluetooth.
How do I cast from an Android phone to a projector with Google TV?
Google's Google TV help page says the phone and the Google TV device must be on the same Wi-Fi network. Open an app that supports casting, tap the Cast icon, choose the projector's name from the list, and confirm the icon changes color. The help page also says casting only works with the latest version of a Chromecast-enabled app or a Chrome browser.
Why can I not cast Netflix from my phone?
Netflix's help center says casting only works on cast-compatible TVs and displays and lists a short set of devices, and says casting or mirroring needs a Standard or Premium plan. Nebula and Dangbei both say protected apps such as Netflix usually cannot be cast or mirrored, so open the Netflix app on the projector and sign in there.
Can I plug my Android phone into a projector with a cable?
Sometimes. Samsung says a standard USB-C to HDMI adapter can start Samsung DeX on supported Galaxy models, and Netflix says USB-C Android devices can use a video cable or adapter depending on the TV's port. Whether your phone sends video over USB-C depends on the phone, so check its manual. The projector also needs an HDMI input: the XGIMI MoGo 3 Pro uses a micro HDMI port, so you may need a different cable.
Will casting work on hotel or dorm Wi-Fi?
Often not, because casting needs the phone and the projector on the same network, and shared networks can keep devices apart. Nebula's support page says a phone hotspot works as the shared network, so a hotspot or a travel router is the usual workaround.
Do I need an Android TV or Google TV projector?
For wireless casting from Android, it is the simplest route. The models below list Google TV or Android TV and Chromecast or Google Cast. A projector that runs another operating system, such as the VIDAA system on the Hisense C2 series, may not offer Google Cast, so check the specs before you buy.